TradeExamPro

Leed energy practice questions

32 questions from the LEED Green Associate practice test.

Start practising

Leed energy practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

What does a higher R-value on an insulation product indicate?

  1. Greater resistance to heat flow
  2. Greater heat transfer through the material
  3. Higher moisture absorption
  4. Lower material density only
Show the answer

A. Greater resistance to heat flow

R-value measures thermal resistance, so more R means less heat flows through. The tempting wrong answer reverses this and describes a higher U-factor.

Reference: USGBC LEED Green Associate candidate handbook; LEED rating system, Energy and Atmosphere category (concepts common to v4 and v5)

What does global warming potential (GWP) express for a refrigerant?

  1. Its ozone damage compared with a reference gas
  2. Its cooling capacity per pound
  3. Heat-trapping effect relative to CO2
  4. Its operating pressure at room temperature
Show the answer

C. Heat-trapping effect relative to CO2

GWP compares how much heat a gas traps with the same mass of carbon dioxide over a stated time period. Ozone damage is a different measure called ODP.

Reference: USGBC LEED Green Associate candidate handbook; LEED rating system, Energy and Atmosphere category (concepts common to v4 and v5)

Why is submetering used in a building?

  1. To lower the utility's rate per unit
  2. Track use by system or tenant
  3. To replace the main utility meter
  4. To measure indoor air quality
Show the answer

B. Track use by system or tenant

Submeters break total use into parts so problems and waste can be found and costs allocated. They do not replace the utility meter or change the rate.

Reference: USGBC LEED Green Associate candidate handbook; LEED rating system, Energy and Atmosphere category (concepts common to v4 and v5)

Other topics