10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.
Sample questions
A BC worker will be working 2 m above a pile of upright rebar stakes. Is fall protection required even though the height is under 3 m?
No, because the fall is under 3 m
Yes, impalement risk requires protection
No, because short falls are never injurious
Only if the worker is alone
Show the answer
B. Yes, impalement risk requires protection
BC Part 11 also requires protection for falls under 3 m when the landing hazard makes injury worse than a fall onto a flat surface. Impalement on rebar is that case. The 3 m figure is a general trigger, not an exemption.
Reference: BC OHS Regulation Part 11 (Fall Protection), s. 11.2
On an Ontario construction project, a work surface is used as a path for wheelbarrows or similar equipment. Fall protection is required if a worker could fall more than what distance?
0.6 m
2.4 m
3 m
1.2 m
Show the answer
D. 1.2 m
Where the surface serves as a travel path for wheelbarrows or similar equipment, the regulation lowers the trigger to more than 1.2 m. The 3 m general figure is too high for this case.
Reference: O. Reg. 213/91 (Construction Projects), Ontario, s. 26.1
A worker on an Ontario construction project is 1.5 m above an open pit with moving machinery inside. Is fall protection required?
Yes, because falling into operating machinery is a listed hazard at any height
No, because the drop is under 3 m
No, if the worker wears a hard hat
Only if the pit is deeper than 3 m
Show the answer
A. Yes, because falling into operating machinery is a listed hazard at any height
Section 26.1 requires protection where a fall could be into operating machinery, hazardous substances or objects, regardless of height. The 3 m rule does not cancel that duty.
Reference: O. Reg. 213/91 (Construction Projects), Ontario, s. 26.1