TradeExamPro

Traction hydraulic systems practice questions

32 questions from the Elevator contractor practice test.

Start practising

Traction hydraulic systems practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

With 2:1 roping, the car moves at 400 feet per minute. How fast are the hoist ropes moving at the drive sheave?

  1. 800 feet per minute
  2. 200 feet per minute
  3. 400 feet per minute
  4. 1,600 feet per minute
Show the answer

A. 800 feet per minute

With 2:1 roping the ropes travel twice as far as the car, so rope speed is double the car speed. 200 fpm is the mistake of dividing instead of multiplying.

Reference: Elevator mechanical arithmetic (speed, force and pressure relationships)

A machine-room-less elevator differs from a conventional traction elevator mainly because the

  1. machine is located in the hoistway or its headroom
  2. car is driven by a hydraulic jack
  3. ropes are replaced by chains only
  4. counterweight is not required
Show the answer

A. machine is located in the hoistway or its headroom

A machine-room-less unit places the compact drive in the hoistway, usually at the top or on a rail, instead of a separate room. It is still a roped traction unit with a counterweight.

Reference: ASME A17.1-2025/CSA B44:25, Part 2 (electric elevators); roping and machine principles

A hydraulic elevator car settles slowly downward at a floor with the pump off. What is the most likely cause?

  1. Oil tank is overfilled
  2. Oil leaking past a valve seat
  3. Ropes are too tight
  4. Car is lightly loaded
Show the answer

B. Oil leaking past a valve seat

With the pump off, the trapped oil must hold the car; a creep down means oil is passing a leaking check or down valve seat, or the jack packing. Overfilled tanks do not move the car.

Reference: ASME A17.1-2025/CSA B44:25, Part 3 (hydraulic elevators); hydraulic power unit principles

Other topics