TradeExamPro

Asbestos regulations practice questions

35 questions from the Asbestos, mold and radon practice test.

Start practising

Asbestos regulations practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

A crew will remove asbestos-containing vinyl floor tile. Which OSHA class of work is this?

  1. Class I
  2. Class II
  3. Class III
  4. Class IV
Show the answer

B. Class II

Removing ACM that is not thermal insulation or surfacing material, such as floor tile, sheeting, roofing or siding, is Class II. Class I is limited to thermal system insulation and surfacing material.

Reference: OSHA 29 CFR 1926.1101(b), definition of Class II work

An electrician must drill through asbestos pipe insulation to hang a bracket. The insulation will be disturbed but not removed. Which class of work is this?

  1. Class I work
  2. Class II
  3. Class IV
  4. Class III
Show the answer

D. Class III

Repair and maintenance work likely to disturb ACM is Class III. It is not Class I because the insulation is not being removed, and not Class IV because the material is actually disturbed.

Reference: OSHA 29 CFR 1926.1101(b), definition of Class III work

On an asbestos job, which description fits a regulated area?

  1. Marked area for Class I-III or >PEL
  2. Any room in the building that has ACM somewhere inside it
  3. The truck and dumpster area outside the building only
  4. Only the decontamination unit and nothing else around it
Show the answer

A. Marked area for Class I-III or >PEL

A regulated area is marked off where Class I, II or III work happens, and also includes any area where airborne asbestos is, or may reasonably be expected to be, over the PEL. Having ACM in a room does not by itself make it regulated.

Reference: OSHA 29 CFR 1926.1101(b) and (e)

Other topics