10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.
Sample questions
A homeowner finds visible mold on a bathroom wall. What does EPA guidance say about sampling here?
Usually unneeded; clean visible mold
It is always required before any cleaning starts
It is required to prove the mold type to the city
It must be done by the homeowner with a home kit
Show the answer
A. Usually unneeded; clean visible mold
When mold is visible, sampling is usually not needed because the response is the same: fix the moisture and remove the growth. Sampling answers special questions; it is not a routine first step.
Reference: EPA, Mold Remediation in Schools and Commercial Buildings (EPA 402-K-01-001), Chapter 3 (sampling)
A national numeric limit for acceptable mold spore counts in indoor air is:
Set by EPA at 1,000 spores per cubic metre
Set by OSHA at 500 spores per cubic metre
Set by HUD at 5,000 spores per cubic metre
Not set by any federal agency
Show the answer
D. Not set by any federal agency
No federal standards exist for mold or spore levels, so sampling results cannot show compliance with a federal limit. Results are compared with outdoor air or unaffected areas by a qualified person.
Reference: EPA, Mold Remediation in Schools and Commercial Buildings (EPA 402-K-01-001), Chapter 3 (sampling)
For mold covering less than 10 square feet of a hard surface, what does EPA guidance say about who can do the cleanup?
Only a licensed contractor in full containment
Trained staff or homeowner with basic PPE
Nobody; the room must be demolished
Only a lab technician after air testing
Show the answer
B. Trained staff or homeowner with basic PPE
Small areas can generally be cleaned by maintenance staff or a homeowner wearing gloves, eye protection and a respirator such as an N95. Larger or hidden problems call for planning and trained workers.
Reference: EPA, A Brief Guide to Mold, Moisture, and Your Home