Rs concrete forming practice test
10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.
Sample questions
What does a snap tie or similar wall tie do in a poured wall form?
- Carries the weight of the concrete to the footing
- Holds form faces at wall thickness
- Stops the concrete from freezing
- Lifts the form into place with a crane
Show the answer
B. Holds form faces at wall thickness
Ties resist the outward push of wet concrete and fix wall thickness through a spreader or cone. They are not lifting devices or insulation.
Reference: Red Seal Carpenter standard, form hardware; form hardware manufacturer instructions
You have built the rectangular side forms for a footing. Which check shows the layout is square?
- The long sides are level with each other
- The corner stakes are the same height
- The two diagonals measure the same
- The side forms are the same thickness
Show the answer
C. The two diagonals measure the same
In a true rectangle the diagonals are equal. Level and stake height say nothing about squareness.
Reference: Red Seal Carpenter standard, layout; geometry of the rectangle
Why must reinforcing steel have concrete cover around it?
- To make the bars easier to bend
- To let the concrete slump more
- To save on the amount of steel used
- Protect steel from rust and fire
Show the answer
D. Protect steel from rust and fire
Cover keeps moisture and heat away from the steel and helps develop bond. It has nothing to do with slump or bending.
Reference: CSA A23.3 cover requirements, edition named in the project specification; Red Seal Carpenter standard