TradeExamPro

Rs framing practice questions

35 questions from the Red Seal carpenter (403A) practice test.

Start practising

Rs framing practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

A straight wall is 24 ft long and the studs are laid out at 16 in on centre, with a stud at each end. How many studs are on the layout for this wall (ignore openings and corners)?

Answer in studs.

Show the answer

19 studs

24 ft = 288 in. 288 / 16 = 18 spaces. Studs = spaces + 1 = 19.

Reference: Red Seal Occupational Standard for Carpenter (2022), framing tasks; standard framing practice

To check a wall is square using the 3-4-5 method, you measure 6 ft along one plate and 8 ft along the adjoining plate. What should the diagonal between the two marks read?

  1. 9 ft
  2. 10 ft
  3. 11 ft
  4. 12 ft
Show the answer

B. 10 ft

6 squared plus 8 squared is 100, so the diagonal is 10 ft. Only a 10 ft reading proves a right angle; 9 or 11 ft means the corner is out of square.

Reference: Red Seal Occupational Standard for Carpenter (2022), framing tasks; standard framing practice

Why are the top plates of a wall doubled, with the upper plate lapping the joints and corners of the lower plate?

  1. It makes the wall exactly 3 in taller
  2. It lets you skip the sole plate
  3. Ties walls and spans plate joints
  4. It makes the studs easier to toenail
Show the answer

C. Ties walls and spans plate joints

The lapped upper plate ties walls together at corners and intersections and carries load across joints. Height is not the purpose, and the sole plate is still needed.

Reference: Red Seal Occupational Standard for Carpenter (2022), framing tasks; standard framing practice

Other topics