10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.
Sample questions
Which backer is the better choice for a tile tub surround in a wet area?
Standard paper-faced gypsum drywall
Untreated hardboard
Cementitious backer board
Foam board with no facing
Show the answer
C. Cementitious backer board
Cement backer board does not soften when it gets wet. Standard paper-faced drywall loses strength with moisture and is not a tile base in wet areas.
Reference: ANSI A118.9; TCNA Handbook for Ceramic, Glass, and Stone Tile Installation (current edition)
Why do installers back-butter large-format floor tile?
To make the tile slide further when it is placed
To avoid having to comb the floor with a trowel
To reduce the needed grout joint width to nothing
Ensure full mortar contact
Show the answer
D. Ensure full mortar contact
Skim coating the tile back fills voids left by the combed ridges, improving coverage and bond. It is done in addition to combing, not in place of it.
Reference: ANSI A108.5; TCNA Handbook for Ceramic, Glass, and Stone Tile Installation (current edition)
What should fill the movement joint at a floor-to-wall perimeter in a tiled floor?
Flexible sealant
Rigid cement grout
Thinset mortar
Hard plaster patch
Show the answer
A. Flexible sealant
Tile and its bed move with temperature and humidity, so the perimeter needs a soft joint that can compress and stretch. Rigid fill transfers stress and can crack or tent the tile.
Reference: TCNA EJ171 movement joint guidance; TCNA Handbook for Ceramic, Glass, and Stone Tile Installation (current edition)