TradeExamPro

Glazing practice questions

36 questions from the Interior finish and envelope trades practice test.

Start practising

Glazing practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

A heat-strengthened lite is best described as which of the following?

  1. The same as fully tempered glass but cheaper
  2. Stronger than annealed, not safety
  3. Weaker than annealed glass but safer when broken
  4. Laminated glass without the interlayer
Show the answer

B. Stronger than annealed, not safety

Heat-strengthened glass has a lower surface stress than fully tempered glass. It resists thermal stress better than annealed, but it breaks into larger pieces and does not qualify as safety glazing. Calling it tempered is the common mix-up.

Reference: ASTM C1048, heat-treated flat glass

How can a glazier tell which side of a float glass lite is the tin side?

  1. The tin side is always the thicker face
  2. The tin side has a visible grain when wiped
  3. The tin side is the one facing the manufacturer's label
  4. A short-wave UV lamp makes the tin side glow faintly
Show the answer

D. A short-wave UV lamp makes the tin side glow faintly

Float glass picks up a trace of tin on the face that rode on the molten bath, and that face fluoresces under short-wave ultraviolet light. This matters for coatings and some laminating or mirror work. Thickness is the same on both faces.

Reference: ASTM C1036, flat glass; coated glass manufacturer instructions

What is the safest way for one person to hand-carry a medium lite across a flat job site?

  1. Vertical on its long edge
  2. Flat against the chest with both arms underneath
  3. Flat over the head to keep it clear of the ground
  4. Tilted flat across one shoulder with one hand
Show the answer

A. Vertical on its long edge

Carrying on edge keeps the load in line with the body, lets the carrier see, and puts the lite's strength along its plane. A flat lite flexes and can snap, and carrying overhead puts the broken pieces on the carrier.

Reference: 29 CFR 1926.250, general requirements for storage and handling; glazing contractors' handling guides

Other topics