TradeExamPro

Heavy equipment cranes safety practice questions

34 questions from the Excavation, demolition, highway and heavy practice test.

Start practising

Heavy equipment cranes safety practice test

10 questions, graded as you go, with the reason for every answer. Start free, no sign-up.

Sample questions

A crane boom touches an energized power line, but the operator is unhurt and there is no fire. What should the operator do first?

  1. Climb down quickly so the crane can be moved away from the line
  2. Stay in the cab, warn others to stay away, and wait until the utility says the line is dead
  3. Step onto the ground holding the crane's handrail to stay steady
  4. Ask the oiler to pull the boom free using a rope
Show the answer

B. Stay in the cab, warn others to stay away, and wait until the utility says the line is dead

Staying in the cab keeps the operator at one potential, and ground around the machine can be energized. Leaving is only for imminent danger such as fire. Touching the machine and the ground at once can be fatal.

Reference: 29 CFR 1926 Subpart CC (eCFR, current), 1926.1408 (training on contact with a line)

A mechanic must work under a raised dump truck bed. What must the truck have to prevent the body dropping while work is done?

  1. A second operator in the cab with the engine running
  2. A chain looped around the body and the frame
  3. A permanent, lockable support for the body
  4. Wheel chocks on the rear tires only
Show the answer

C. A permanent, lockable support for the body

Dump trucks must carry a positive support that is permanently attached and can be locked in place. Chocks stop rolling, not a falling body, and a chain or a person in the cab is not a positive support.

Reference: 29 CFR 1926.601(b)(10) (eCFR, current)

Which items must be checked on a site truck at the start of each shift?

  1. Paint condition and the company logo
  2. Only the fuel level and engine oil
  3. Only the cab radio and the tail lights
  4. Brakes, steering, tires and horn
Show the answer

D. Brakes, steering, tires and horn

The pre-shift check covers the safety-critical systems: service and parking brakes, steering, tires, horn, seat belts, controls and lights where fitted. Defects must be fixed before the vehicle is used.

Reference: 29 CFR 1926.601(b)(14) (eCFR, current)

Other topics